Miele | Display shows: Fault 73

Cause:
The brew unit cannot be positioned correctly.

Remedy:
? Check whether you can remove the brew unit.
? If you can remove the brew unit, clean it.
? Push the coffee ejector of the brew unit into the correct position; see figure.
? Insert the waste container and the water container.
? DO NOT insert the brew unit.
? Close the door and switch the coffee machine on with the ‘On/Off’ sensor.

The brew unit motor will be initialised.

? When ‘Insert the brew unit’ appears on the display, open the door and put all the parts back in the machine.

If the brew unit cannot be removed:
? Switch the coffee machine off with the ‘On/Off’ sensor.
? Wait for approximately 2 min before switching the machine back on again.

前へ：Miele | 初めてミルクの泡を作った時、ミルクジャグから漏れてきた。

次へ：Miele | ドアを閉めること、もしくは開けることが難しい。